top of page

Explain Spread Adhesive

1. Adhesive should be trowelled

on evenly onto walls and floors.

Spread adhesive horizontally when

tiling walls.

2. Tiles are then placed into position

and pressed into the adhesive

by using a slight up and down

movement. Tiles should have an

adhesive covering of at least 80%

3. Once the tile is roughly in position,

remove any excess adhesive and

insert a spacer. Move the tile to

ensure accurate positioning. To

allow removal of tile spacers, avoid

pressing them too far into the joint.

3 views0 comments

Recent Posts

See All


bottom of page